PRODUCT
SP-395
(Halogen stable Azole tracing)
The Pyxis SP-395 analyser is an ultraviolet fluorometer. It measures halogenated tolytriazoles (HST) in a water sample. When using this analyser, sample acidification is not required. HST measurement is independent of sample pH in the range of 6 to 10.
Manufactured by: Pyxis Lab Inc., USA
-
FEATURES
-
BENEFITS
-
RESOURCES
-
GET A QUOTE
-
Key Features
- UV absorbance of Azole for ppm readout
- HST Azole detection range: 0 ppm to 7.5 ppm
- Not for use in Nitrite treated water
- No reagents required
- No vial or cuvette to lose or break Specifications
- Specification measurement range: 0.1 ppm to 7.5 ppm HST
- Detection limit: 0.1 ppm HST
- Accuracy: ±0.1 ppm HST
- Battery: 9V Alkaline battery
- Battery life: ~3200 readings (480mAh battery)
- Display: 320x240 px TFT-LCD, visible under direct sunlight
- Dimensions: 160x74x33 mm (LxWxH)
- Weight: 310g without battery
- Temperature range: 40°F to 106°F (4°C to 41°C)
- Humidity: 85% at 106°F (41°C)
- Environmental: IP67, dustproof, and waterproof
- Sample acidification is not required. HST measurement is independent of sample pH in the range of 6 to 10
- Extra color and turbidity parameters measured are used for automatic compensation to eliminate interference
- No sample cuvette is needed and variations associated with the cuvette are eliminated
- Large color graphic screen that can be read in direct sunlight
- A single conductivity calibration using a single standard, covers the whole measurement range of 0 μS/cm to 15000 μS/cm
- Accurate and rapid results
Your message was sent successfully. Thanks.